Hilux
Fast Halogen Visible Curing Lights
CRA Evaluated
6-98, 8-98, 1-99, 6-99, 5-00, 10-00
- Ten Step (10-90 Seconds) Audible Timer at the Hand piece with Two
Color LED Warning Light
- High Energy Output
- One Touch trigger with Override Control
- Unit Runs cool continuously
- Image grade autoclavable light guide
- Unit can be wall, cart or chair mounted
 Hilux 200 - #L009-24
The New Hilux 200 Curing Light features consistent high power output
(600 mw/cm2),one hand operation 10-90 second timer cycles,
11mm autoclavable light guide with 7 mounting options. The Hilux 200 has
an improved fan and vent design for better cooling and lower noise
levels. The Hilux 200 offers superior performance and design at an
affordable cost, and is backed by a hassle free two year warranty.
ORDER NOW
Hilux 250 - #L009-250
The Hilux 250 Fast Halogen Curing Light features consistent high power
output (600-800 mw/cm2), one hand operation, 10-90 second
timer cycles, 11 mm autoclavable light guide seven mounting options and
a built in pass/fail radiometer to check power output before each
procedure. The Hilux 250 has an improved fan and vent design for better
cooling and lower noise levels. The Hilux 250 offers superior
performance and design at an affordable price, and backed by a two year
hassle free warranty .
Order Now
Hilux 250TA - #L009-250TA
The New Hilux 250TA Fast Halogen Curing Light features consistent high
power output (900-1100 mw/cm2), for 10 second curing of most
composites. The 250TA features one hand operation, 10-90 second timer
cycles, seven mounting options, new low IR filter, quiet thermo
controlled fan and pass/fail radiometer. The unit comes with both a
tapered 13 to 8 mm Turbo-Accelerator light guide and 11mm light guide.
The Hilux 250 offers performance and affordability, backed by a two-year
hassle free warranty.
Order Now
Hilux 601 - #L009-601
The New Hilux 601 Fast Halogen Curing Light features 5 second curing and
user defined settings for all curing and bleaching procedures. A new
electronic voltage regulated transformer produces 1150-1400 mw/cm2
of constant curing power. The light intensity can be varied by a control
on the hand piece and calibrated with a built in radiometer. Ramp curing
mode increases power gradually during the first 25% of the selected
timing cycle when activated. Digital timer allows the timing cycle to be
set in one-second increments up to 90 seconds. The new low RPM sensor
controlled fan is quiet and allows continuous operation. The new
ergonomic handgun design reduces fatigue and allows one hand operation.
The unit comes with two light guides, an 11mm and 13 tapered to 8mm
Turbo Accelerator, remote handpiece holder and a hassle free two year
warranty. Order Now
LMD Light Bulb 75 watt # 64617
$ 25.95
|
LED
Blast - #LB001